Made from the same material as MUD-TRAKS^®; there are models rated for single and tandem rear axle trucks that will provide a secure, rigid foundation for lifting. And, they are much lighter than the wooden pads used by line crews everywhere. Unlike wood, fiberglass is not affected by water, so they don’t get heavier and dry rot. We also sell a new series designed to engage a standard “A” frame outrigger system and move with the plate so it self locates. Crane Pad models are available up to 100 ton lift cranes.

Super Crib (Model 6/7SC-24) for utilities requiring additional attention to detail to create a safe platform to lift or stabilize a line truck. Super Cribs can be set directly on the ground if the soil underneath is stable enough to support the load. Field personnel are responsible for making that determination. We recommend the use of a rigid panel to be used under the cribbing as a support base to carry the load in any soft ground situation. Super Crib is made from Non-absorbent material. It is much Stronger, cleaner and safer, than wood. Aggressive pattern to create a slip-resistant pyramid-locking surface on two sides and an Interlocking lincoln log surface on the other sides. Rope handles are on both ends for handling ease.

Made from aircraft grade aluminum, the Ditch Bridge is pre-engineered to handle large utility line trucks, cranes, drill rigs, etc. Available from 6’ to 36’, with a base rating for 65,000 lbs. trucks, and can be designed to meet whatever weight vehicle specifications you have. Because they are pre-engineered, the build time is reduced to a few weeks instead of months. This is the safe way to cross ditches and creeks using the equipment you plan to take to the field without having to bring specialized lifting equipment.

A series of light weight rigid panels to safely cover excavated trenches to keep soil, people, and animals from falling in. Light enough to be handled by men in the field. Trench Covers are popular with cemeteries, telephone companies, gas and water utilites trenching concerns and construction sites. Please note: They are not intended to be used as a street road plate.

Lightweight, recycled rubber mat used to move steel track machines across the road or into the shop without damage to the roadway or concrete floor. They can be used to unload equipment on the roadway. Because they are thin, they have the advantage of not having to stop traffic as the mats are installed on the roadway. Use them in Cemeteries for protection under Front Buckets to prevent damage to the turf, as well as markers.

Made from polyethylene, this 4’ X 8’ mat has the convenience of hand cutouts for lifting, a smooth surface and a matte finish surface and weigh only 46 lbs. Since water can’t hurt them, and they won’t break, they are the perfect “dirt board” for keeping lawns clean when excavating.

These are specialized products for electric power utility crews to handle hydraulic jacks when replacing poles in the field.

Yellow Jacket^® Cable Ramps are used to protect cables from turning into tripping hazards for special events, rental projects, and other temporary electrical connections.

Several styles of connections systems are available for our MUD-TRAKS^® and TRAKMAT^® . View the pdf for installation information. Different applications require different solutions. We suggest you give us a call to help determine the best connector plan for your use.